ART Pro Audio ProChannel II Channel Strip w/ Class-A Tube Microphone Preamp Amp

Description

YOUR BEST SOURCE FOR PRO AUDIO GEAR
Free shipping
on Domestic orders
*
30-day returns
moneyback guarantee
Customer Support
Online Chat
ART Pro Audio ProChannel II Channel Strip w/ Class-A Tube Microphone Preamp Amp
Description
ART Pro Audio ProChannel II Strip (B-STOCK)
The ART Pro Channel II™ uses second-generation discrete Class-A microphone preamp to provide clean quiet gain while maintaining incredible transparency. A powerful dynamics processor subtly controls transients and noise of the most demanding sources.
The ART Pro Channel II™ 's semi-parametric EQ offers wide tune-ability and can be patched before OR after the dynamics processor. Separate rear-mounted insert points allow patching in external signal processing gear immediately after the Mic preamp and before the EQ and dynamics processor. Both analog and LED meters provide a detailed indication of audio levels.
Features
Fully Featured discrete class "A" Tube Microphone Preamplifier
1/4" High Z input on the front panel
Selectable plate Voltage
Smooth musical sounding Optical Compressor
Separate Attack and Release controls
Auto/Manual Attack/Release switch
Parametric EQ
Large VU and LED meters
Multi section clip monitor LED
Selectable Source switches for VU signal monitoring of any section of the unit
Two insert loops
+4/-10 dB switch for optimal signal output levels
Toroidal power transformer for low noise
Specifications
Specifications
Input Impedance
Mic: 150 to 3.4K Ohms, variable
Instrument: 2.5M Ohms
Preamp Insert: .5K Ohms
Output Impedance
Balanced Output: 600 Ohms balanced
Unbalanced Output: 300 Ohms
Insert Outputs: 300 Ohms
Frequency Response
Analog In to Analog Out: 12Hz to 100KHz +0, -1dB
THD @ 1 KHz: <0.15% typical
THD @ to to 20 KHz: <0.033% typical
Equivalent Input Noise
Mic/Line: -128dBu, Input shortened, Max gain, "A" weighted
Instrument: -109 dBu, Input shortened, Max gain, "A" weighted
Maximum Input Level
Mic: +18dBu balanced
Instrument: +15 dBu
Maximum Gain
Mic: 70dB (XLR to balanced output)
Instrument: 64 dB (1/4" to balanced output
Maximum Output Level
Balanced: +24 dBu
Unbalanced: +20 dBu
Output Level At Meter 0 VU: +4 dBu/-10dBV
Preamp
Microphone Gain: 0 dB to +56 dB
Instrument Gain: +3 dB to +50 dB
Low Cut Filter: 0 - 250 Hz, 1-pole, 6 dB/Octave
EQ
Boost/Cut: +/- 12 dB on each band
Low Freq. Tuning: 40 / 120 Hz Selectable
MID 1 Freq. Tuning: 20 Hz to 2 KHz continuously variable
MID 2 Freq. Tuning: 200 Hz to 20 KHz continuously variable
High Freq. Tuning: 6 KHz / 18 KHz Selectable
Compressor / Limiter
Attack Time: 250 uSec. to 100 mSec.
Release Time: 00 mSec to 3 Sec.
Compression Ratio: 2:1 to 30:1
Dimensions (H x W x D - in): 3.5 x 19.0 x 9.2
Dimensions (cm):
8.9 x 48.3 x 23.3
Weight (lbs/kg):
11/5
Power Requirements:
USA - 105 to 125 VAC/ 60 Hz
Export units configured for country of destination.
*We only offer free shipping to the lower 48 contiguous states. AK, HI, APO, FPO and US Protectorates (PR, VI and American Samoa) addresses will incur additional shipping charges. Please contact us for a shipping quote. These shipments will only be shipped via Priority Mail. There are some instances that free shipping will be offered if they are smaller and lighter items.