Art-Net ArtNet to DMX Interface / Controller , FreeStyler

Description

Art-Net ArtNet to DMX Interface / Controller , FreeStyler
Description
Package Included:
Input:
Art-Net Protocol
Output:
DMX Signals (Total 512 channels)
Size:
9 X 5.8 X 2.3 cm
Package:
ArtNet to DMX Interface
1 pc
Ethernet cable
1 pc
RJ45 to 3-pin-XLR DMX adapter
1 pc
DC 5V power
1 pc
Configure your computer's Local Network Adapter to below IP and it's plug and play!
IP address:
2  . 0 . 0 . 1
Subnet mask:
255. 0 . 0 . 1
Default gateway:
2  . 0 . 0 . 1
COMPATIBLE   SOFTWARES
FreeStyler
MagicQ – ChamSys
QLC+
MADRIX
DMXcontrol
LightFactory
Chameleon
Lightjams
Venue Magic
LumiDMX
Jinx!
Martin M-PC
Input:
Art-Net Protocol
Output:
DMX Signals (Total 512 channels)
Size:
9 X 5.8 X 2.3 cm
Package:
ArtNet to DMX Interface
1 pc
Ethernet cable
1 pc
RJ45 to 3-pin-XLR DMX adapter
1 pc
DC 5V power
1 pc
No need to install driver.
Configure your computer's Local Network Adapter to below IP and it's plug and play!
IP address:
2  . 0 . 0 . 1
Subnet mask:
255. 0 . 0 . 1
Default gateway:
2  . 0 . 0 . 1
COMPATIBLE   SOFTWARES
FreeStyler
MagicQ – ChamSys
QLC+
MADRIX
DMXcontrol
LightFactory
Chameleon
Lightjams
Venue Magic
LumiDMX
Jinx!
Martin M-PC
ShowMagic
TJShow
D::Light
White Cat Lighting Board
StageSoft - CHROMA
Enttec D-Pro
Kineme Art-Net Tools
TroikaTronix - Isadora
ArKaos MediaMaster Pro
Resolume Avenue 3
MXWendler FXServer
WYSIWYG
Step by Step
Step ONE
-- Check the items in package
Besides this manual, you should find 4 items in package:
ArtNet to DMX Interface
1 pc
Ethernet cable
1 pc
RJ45 to 3-pin-XLR DMX adapter
1 pc
DC 5V power
1 pc
Step TWO
-- Configure your computer's Local Network Adapter.
In this example, our system is Windows 10.
Step 1:
Right-click the Network  icon located at the bottom-right corner of the Desktop screen,
then click Open Network and Sharing Center.
Step 2:
Click Change adapter settings.
Step 3:
Right-click on the Local Area Connection icon and click Properties.
Step 4:
On the Local Are Connection Properties window,
select Internet Protocol Version 4 (TCP/IPv4) then click Properties.
Step 5:
Click the radio button beside Use the following IP address:
and enter the IP address, Subnet mask and Default gateway in the fields provided.
Step 6:
After setting the static IP address on your computer, click OK then click Close.
Step THREE
-- Connect the cables and power on the Interface.
Connect the Ethernet cable between your computer and the Interface, power on the interface with the DC5V power supply.
Step FOUR
-- FreeStyler Interface setup.
Open FreeStyler,  choose menu Setup --  FreeStyler Setup
You will bring up below Setup window.
Package Included:
1x    ArtNet to DMX Interface
1x    Ethernet cable
1x    RJ45 to 3-pin-XLR DMX adapter
1x    DC 5V power
Shipping
Item will be shipped within 24 -48 hours after full payment is received.
Normally the shippment to worldwide is used to take 15 to 30 business days, exclude Sat & Sun.
Payment
We accept PayPal only.
Payment must be received in 7 business days of auction closing.
Please leave note for your special request (e.g. Colors or Size) in ebay note when you pay the order.
Any special request cannot be accepted after 24 hours of payment,because most of orders will be processed instantly and same day dispatched.
Contact Us
If you have any questions, please feel free to email our servicer ，and we will reply you ASAP. If no response within 24 Hours, please check the spam of mail box or kindly re-send it to us.
We greatly appreciate your POSITIVE feedback. Please do NOT leave negative or neutral feedback without any contact. If you haven't received item in 45 days, please contact us and we will arrange refund or resend
Feedback
We care about our valued buyers, if you have any questions, our Customer Service staffs will be very glad to help you. We try our best to reply your email as soon as possible, please kindly allow 24 hours(working day) for us to response. Thank you.
We greatly appreciate your POSITIVE feedback. Please do NOT leave negative or neutral feedback without any contact.