DMX512 2.4G ISM Wireless PCB Board Module LED Controller Receiver Transmitter

Description

DMX512 2.4G ISM Wireless PCB Board Module LED Controller Receiver Transmitter
Features:
2.4G wireless DMX512 R / T template, single button operation, three color LED display.
Small size, suitable for the interior of the desired lighting Esay.
The standard DMX512 protocol data of the transmission console can also transmit lighting and lighting DMX512 protocol data.
126 channels automatic frequency hopping, strong anti-interference ability. Ensure work reliability.
The 7 groups of ID codes can be set, and the user can use 7 groups of personal wireless networks in the same place without mutual interference.
Specifications:
Material: PCB
Size: Approx. 7*1.8*1.7cm/2.76*0.71*0.67inch
Input Voltage: DC 5V 500mA Min
Operating frequency section: 2.4G ISM, 126 Channel Frequency section
Transmitted power: 20dBm Max
Receiver sensitivity: -94dBm
Signal port: 3-pin female plug
Communication distance: 400m/1312.34ft (visible distance)
Signal port: RS485 or CPU series port AURT
Application: Upgrade DMX512 Stage Lights
Package list:
1 x DMX512 Receiver&Transmitter Kit
Note:
ID code and LED color are associated:
1: RED
2: GREEN
3: RED+GREEN = YELLOW
4: BLUE
5: RED+BLUE = PURPLE
6: GREEN+BLUE = CYAN
7: RED+GREEN+BLUE = WHITE
Press the button once to indicate the ID setting, press the button again to set the ID, then press the ID button to add 1 each time.
Working conditions:
The LED is constantly lit: no DMX or wireless signal.
Red LED flashes: .
Green LED flashes: Receive
RF - 2. 400-2. 525 G, a total of 126 channels, automatic search.
ID code - 1-7 group ID code, press button to set, can only work under the same ID code of the transmitter and receiver.
Establish connection:
Turn on the power of the DMX512 wireless receiver and transmission board.
Press the button to set the same ID value of the transmitting board and the receiving board. If you need to use more than one group of wireless networks at the same place, use different ID values.
When the transmitter transmits DMX data in the no-interference frequency portion, the red LED flashes and the receiver changes the communication frequency portion. The green LED flashes until the same ID value is corrected, and once the DMX data is faster, the LED flashes faster.
Then the connection is established correctly.
Payment
We accept PayPal .
We ship item to your PayPal verified address.
Payment must be received within 3 days from the date of purchase.
Terms Of Sales
1. Our listing price includes the value of goods,packaging cost,and export
taxes,not including international duties.
2. duties,taxes,and charges are not included in the item price or shipping fee.
3. The duties are buyers' responsibility.Please check with your country's
customs office determine what these additional costs will be prior to your
purchase.
4. All disputes arising from the duties will be submitted to eBay for solution.
Feedback
Any questions, pls. contact us via ebay message or email us.We will reply your message within 48 hours. If you do not receive our reply within 48 hours, pls. post a message again because sometimes our message system may block some emails.
If you are satisfied with our service, pls. kindly leave us a positive feedback and give us the Detailed Seller Rating with all "5 " in very area.
Our aim is to provide Level Customer Service, your recognition will encourage us greatly and serve you better.
We strive to keep all our customers satisfy.
Contact Us
We will do our up most to exceed your expectations in customer service, communication and dispatching of your orders.