Enttec 70050 Storm 244

Description

Enttec 70050 Storm 244
Enttec 70050 Storm 244
Storm 24
SKU: 70050
The world’s most powerful Ethernet-to-DMX converter
Giving you optimal performance at an affordable price point, Storm 24 handles multiple protocols with speed and precision.
The rear of the unit features 24 DMX outputs in an RJ45 form factor. This means it’s installer-friendly, cost-effective, and most importantly, perfect for any LED pixel-mapped project or large traditional lighting rig.
With a Gigabit Ethernet connection and rugged 1u enclosure, Storm 24 handles Art-Net, sACN and ESP with ease. In addition, using ultra-fast memory and logic, its Sync Mode matches all 24 DMX outputs to within 100 microseconds of each other. This means no more image ghosting or tearing of your content.
Meanwhile, the Storm 24’s web interface features intuitive drag and drop functionality. Easily route and mix Ethernet input protocols to physical DMX and send to different areas of your installation. Furthermore, the inbuilt DMX generator allows channels to be set to different levels for testing without the need for an eDMX source.
Put simply, no other Ethernet-to-DMX converter on the market offers this level of performance.
Features
Outstanding Value
With a groundbreaking per port system cost, DMX conversion is no longer a high-cost item in your pixel mapping budget. RJ45 outputs also lower cabling costs by using standard crimp connectors instead of more expensive XLR connectors.
Amazing Performance
Using state of the art FPGA programmable Logic, ultra fast DDR memory and Gigabit ethernet, all 24 DMX outputs are synchronized within 100 micro seconds, when using Sync mode. No more image ghosting or jumpy updates of your content. No other device offers this level of performance.
Easy Cabling
Easier and lower cabling costs using standard RJ45 outputs. Although XLR connectors are widely used in the entertainment world, when your project isn’t travelling the world on a regular basis, RJ45s connectors offer the best price/performance ratio. Using standard shielded CAT5 cable to connect your whole system also helps keep the cost per port down. We use the standard ANSI E1.27-2 specified RJ45 pinout to make sure most equipment connections will be simple.
Multi-Protocol Support
Art-Net 1
Art-Net 2
Art-Net 3
sACN
KiNET
ESP
Input/Output
24 DMX 512 output ports on RJ45
1 Gigabit Ethernet port
Jumbo Frame support
1 RS232 input for profile selection via serial command. Note: RS232 is not supported by RevC devices produced after April 2020.
Compatible Apps
Recommended App: ELM
ELM : ENTTEC LED MAPPERprovides total control over your LED system, regardless of shape and size. Design your layout with vector-based objects for maximum precision and flexibility.
Load the media of your choice and begin playback as needed. Supports Spout and NDI. Supports RGB, RGBW, RGBA, RGBAW/RGBWA and White fixtures
Compatible 3rd Party Apps
Art-Net Controller Android
ArtNetDmxRemote iOS (iPhone/iPad)
Aurora DMX Android
Chameleon Mac OSX
Freestyler Windows
Jinx! LED Matrix Control Windows
LXConsole Mac OSX
LightFactory Windows
LightForge Windows
LightJams Windows
Lightkey Mac OSX
Luminair iOS (iPhone/iPad)
MadMapper Mac OSX / Windows
Millumin Mac OSX
QLC + Win / Mac / Linux
Run The Show iOS (iPhone/iPad)
TouchDesigner Windows
Vibrio iOS (iPhone/iPad)