-40%
Lixada 2.4G Ism Dmx512 Wireless Male & Female 2 In 1 Xlr Receiver &
$ 64.86
- Description
- Size Guide
Description
Specification:2.4G wireless DMX512 R/TInput voltage: 5VDC 500mA MINReceive Sensitivity: -94dBmMax transmitting power rate: 20dBmDMX connector: 3pin male, 3pin femaleCommunication distance: 400M ( visible distance )Work frequency section: 2.4G ISM, 126 channels.frequency sectionPlug standard: US, EU plug ( optional )Material: zinc alloy + plasticItem size: 21 2.5 2.5cm/8.26 0.98 0.98in ( L W H ) ( 1pc )Cable length: 107cm/3.51ftItem weight: 65g/2.29oz ( 1pc )Package size: 14.5 10.5 4.5cm/5.7 4.13 1.77in ( L W H )Package weight: 317g/11.2ozOperating manual:ID code and LED color corresponding relationship:1: RED2: GREEN3: RED+GREEN4: BLUE5: RED+BLUE6:Lixada 2.4G ISM DMX512 Wireless Male & Female 2 in 1 XLR Receiver & Transmitter-L0383EU
Specification:
2.4G wireless DMX512 R/T
Input voltage: 5VDC 500mA MIN
Receive Sensitivity: -94dBm
Max transmitting power rate: 20dBm
DMX connector: 3pin male, 3pin female
Communication distance: 400M ( visible distance )
Work frequency section: 2.4G ISM, 126 channels.frequency section
Plug standard: US, EU plug ( optional )
Material: zinc alloy + plastic
Item size: 21 2.5 2.5cm/8.26 0.98 0.98in ( L W H ) ( 1pc )
Cable length: 107cm/3.51ft
Item weight: 65g/2.29oz ( 1pc )
Package size: 14.5 10.5 4.5cm/5.7 4.13 1.77in ( L W H )
Package weight: 317g/11.2oz
Operating manual:
ID code and LED color corresponding relationship:
1: RED
2: GREEN
3: RED+GREEN
4: BLUE
5: RED+BLUE
6: GREEN+BLUE
7: RED+GREEN+BLUE
1). Press momentary switch above the side led indicator to indicate ID setting.
2). Press again to set IC, to the color ID desired, adding 1 each time you press the switch will advance the color IDcode.
3). Working condition:
LED constant lit up: No DMX or wireless signal.
Red LED flash: Transmitting.
Green LED flash: Receiving
4) RF frequency 2.400 - 2.525G, total 126 channels, it��s searching automatically.
5). ID Code ��1-7�� groups ID code, press ��KEY�� for setting, it only can work under same ID code of transmitter and receiver. ( Same LED Color )
Establishing Communication��
1. Power on DMX512 wireless received board first and then following to power up the transmitted board.
2. Press ��Key�� button to set same ID value of transmitted board and received board. Please use different ID value if you need use more than 1 group wireless universals at same time in same place.
3. The red LED flashes when transmitter transmits DMX data by no interfered frequency section, then receiver changes communicated frequency section. Green LED flashes until received? same ID value, the more DMX data, the faster the LED flashes.
4. Communication was established correctly.<