Multicast sACN (E1.31) to WS2812/2811 Controller Interface 4 Ports 680 Pixels

Description

Welcome to my shop
Product Overview
Multicast sACN (E1.31) to WS2812/2811 Controller Interface 4 Ports 680 Pixels
Detail
sACN (E1.31) to WS2812 Controller
4 ports(universes) output up to 680 pixels
Multicast Format
Remark: If you plug the controller directly to your computer's ethernet jack, then the controller will be plug and play without any IP setting as it works in Multicast format of sACN (e1.31) protocol.
Controllable Pixel Types:
WS2811 / WS2812 / WS2812B / WS2813
Remark: Pixels of DC5V to DC24V are all compatible with the controller.
Unit Size: L11.5cm x W9cm x H4 cm ; Package Size: 16x16x6cm ; G.W.: 350g
Accessories:
(1) Regulated DC 5V 2A Power Supply -- 1 pc
(2) One meter length RJ45 network cable -- 1 pc
Product Brief --
(1) 4 universes output up to 680 pixels. 170 pixels for each output port(universe).
(2) Controllable Pixel Types: DC5V-24V WS2811 / WS2812 / WS2812B / WS2813
(3) Max DC Current Input/Output: 30 Amp. DC Voltage Input/Output: 5V or 24V
(4) Compatible with any software package that supports the E1.31 (sACN) protocol. For software output setup, just select the E1.31 / sACN / ACN output in Multicast format.
If you plug the controller directly to your computer's ethernet jack, then the controller will be plug and
play without any IP setting as it works in Multicast format of sACN (e1.31) protocol.
The controller's default (DMX) universe number output setting as below --
(DMX) universe No.1 assgined to Port 1
(DMX) universe No.2 assgined to Port 2
(DMX) universe No.3 assgined to Port 3
(DMX) universe No.4 assgined to Port 4
You can change/assign/configure different (DMX) universe number to each port such as Universe No.5 to Port 1, Universe No.6 to Port 2, etc...
And if you connect the controller to your router/switch instead of your computer, you need to set the controller's IP to match your router's range.
How to open the Configuration Web Page
Tip: We highly recommend Chrome for configuration page.
Note: You will not be able to access the E1.31 to DMX configuration web page interface with your browser if the 'WEB' LED indicator is off.
Connect the controller directly to your computer's RJ45 ethernet Jack, power on the controller and follow below steps:
(1)
Push the RESET button to restart the interface, then push and hold the MODE button, after a few seconds, you will see both 'WEB' & 'SIGNAL' LED indicators flash together at a rate of one flash per second. After 3 flashes, release the MODE button!
(2)
After a few seconds, the 'WEB' LED Indicator will turn on.
(3)
Then go to your web browser(Google Chrome is highly recommended) and type the controller's temporary IP 169.254.74.73 at address bar and hit Enter on your keyboard, you will bring up the configuration web page.
Note: The web page server doesn’t operate continuously because the controller is only capable of 4 simultaneous internet connections.
So, although the first 3 ports can be dedicated to receiving pixel dimmer data full-time, the 4th port has to be shared between receiving dimmer data and running the web server.
When the controller is restarted or powered on, the Port 4 will be reserved for web server for 99 seconds. After 99 seconds, Port 4 will start to receive dimmer data if no web configuration page is opened.
Configuration Web Page --
Shipping Policy
Item Location
Payment Mathord
Returns Policy
About Feedback
Shipping Policy
Item Location
Payment Mathord
1. PayPal payment accepted only.
2. Items will be shipped to your eBay address. Please make sure it is correct.
3. Payment must be received 4 days after auction ended.
Returns Policy
1. Customer satisfaction is our top goal. We believe our items are so outstanding. All products are quality checked. They are new and in good condition when shipped to our customers. We are convinced you will be happy with your Purchase.
2. If product is defective or damage upon arrival, or wrong product shipped, please contact us immediately. Returns accepted within 14 days of delivery date and item must be in original new condition, not worn or altered in any way with attached tags & wrap. Otherwise deal is final. Return shipping must be paid by buyer.
3. Please contact us first if you have any problems/questions/concerns. We will be happy to resolve any issues you may have in a cordial and friendly manner.
4. We appreciate your Postive Feedback, and will do the same in return. DO NOT leave negative feedback without first communication with us. Please allow max 2 business days for us to response.
About Feedback
When you satisfied with our product and services please leave us positive feedback.
If a problem occurs, contact us immediately with any email request. Just contact us using the " Ask the seller a question" link on eBay.