PocketWizard FlexTT6 Transceiver for Canon Cameras Flashes #13160

Description

PocketWizard FlexTT6 Transceiver for Canon Cameras Flashes
SKU: PWFLEXTT6C
Mfr. Part: 13160
Item Includes
PocketWizard FlexTT6 Transceiver - USB Cable - 2x AA Alkaline Batteries - PocketWizard 1 Year Limited Warranty
Description
The FlexTT6 for Canon is the latest of PocketWizard's flagship TTL radios. With new under-the-hood technology, the FlexTT6 is compatible with the 5D Mark IV, 1D X Mark II, 80D, 77D and T7i, along with Canon's 600 EX II-RT and 430 EX III-RT flashes. The FlexTT6 transmits to ANY PocketWizard receiving radio including the FlexTT5 and has all the great features photographers have come to rely on with our other TTL products: HSS, Patented HyperSync and Interference Free Reliability.
ControlTL
PocketWizard's firmware platform taps into the camera's digital communications to enable an entirely new level of remote flash capability through our proven radio system. ControlTL allows remote TTL for Canon E-TTL II systems as well as Manual Power Control. ControlTL firmware is configurable and upgradeable for "future-proof" continuous improvement. Find more details on ControlTL here
Dedicated E-TTL II Triggering
Locking your FlexTT6 Transmitter into the hot shoe of a Canon DSLR camera and mounting E-TTL II flashes onto FlexTT6 or FlexTT5 Transceivers gives you full autoflash exposure control with the freedom and reliability of a PocketWizard radio. There are no special settings to make or modes to call up. Use the camera, on-camera flash or flash commander controls for flash compensation, zone and ratio control.
Manual Power Control
Adjust the manual power settings of your remote Canon Speedlites directly from an AC3 ZoneController mounted on your on-camera FlexTT6. You can now independently control the power output of up to three groups of lights (you can have as many lights in each group as you want) from full power down to the lowest setting simply using the dials on the AC3. Now you can work with total control with your remote lights, without leaving your shooting position
Zone Select
The FlexTT6 Transceiver has an A-B-C zone select switch to allow use with the remote groups/zones found on the PocketWizard AC3 ZoneController or Canon master flashes. Zones allow you to control single or groups of lights independently from other lights in different zones. These zones can also be used with a MuiltiMAX thus allowing you to pair a single MultiMAX radio on camera with FlexTT6's Transceivers on your remote flashes and utilize many of the MultiMAX's advance trigger functions.
HyperSync
Our patent pending HyperSync technology allows photographers to achieve faster X-sync speeds, sometimes up to 1/8000 of a second, with full power flash. Now you can cut the ambient light and use wide-open apertures, outdoors in bright sunlight. HyperSync automatically adjusts the timing of your flash trigger so that faster than X-sync speeds can be achieved. With certain Canon camera and flash combinations, you can achieve sync all the way to 1/8000th of a second. Just imagine what you can do using flash in bright sun with wide open apertures and fast shutter speeds. Since HyperSync is a trigger function you can use any PocketWizard Receiver including the FlexTT5, PlusX, Plus III, Plus II or MultiMAX. HyperSync works optimally with Studio flash. See Optimized HSS below for higher than XSync speeds with Speedlights.
HyperSync Automation
HyperSync Automation adjusts HyperSync timing in two separate places - on the transmitter and on the receiving ControlTL radio. The transmitting or on-camera FlexTT6 automatically adjusts HyperSync to compensate for changes made to shutter speed. Photographers can further refine HyperSync via the PocketWizard Utility. For more information on Configuring HyperSync Automation, visit the HyperSync section of the PocketWizard Wiki
Optimized High Speed Sync (HSS)
When HyperSync can't keep up, High Speed Sync takes over for Speedlite flash photography all the way to 1/8000. ControlTL optimizes this amazing feature and provides more light (which equals greater working distance), faster recycling times and more flashes per battery set when shooting in Canon's HSS/FP Flash mode. Use this feature to shoot wide open in bright sun for amazing results.
Optimized Rear Curtain Sync
Precise rear curtain sync capability is engaged automatically, no buttons to press. Set the shutter speed at which rear curtain sync is engaged with the PocketWizard Utility. Capture natural light trails with sharp exposures at the end - no "after trails!
Pre-Flash Boost
In some E-TTL situations, including shooting in full sun, over long distance or using diffusers or bounce flash, the normal pre-flash is simply not enough for the camera to see. With Pre-Flash Boost, the pre-flash is two stops brighter. This will approximately double the working distance of E-TTL II, compensating for the light loss when defusing or bouncing
Power Tracking
When working with the PowerST4, PowerMC2 and AC9/FlexTT6 paired with compatible manual flashes, you can change any of your settings on your camera and the system adjusts for those changes. Change your flash exposure compensation to adjust the exposure or make adjustments in aperture or ISO and the system balances your flash for proper exposure
Basic Trigger Mode
Allows the FlexTT6 to work as basic trigger on ANY camera it will fit.
PocketWizard Compatible
When used as an on-camera transmitter, the FlexTT6 works seamlessly with any other PocketWizard radio, including a FlexTT5, attached to a remote flash. The FlexTT6 is also compatible with the FlexTT5 .
PocketWizard Utility - Programmable and Upgradeable
Use the supplied PocketWizard Utility software with the on-board USB port to program the FlexTT6 to any PocketWizard channel and zone as well as many other custom settings. The FlexTT6 can be upgraded whenever updates and feature enhancements are available.
Auto-Sensing Transceiver Technology
PocketWizard's Auto-Sensing Transceiver Technology enables the FlexTT6 Transceiver to switch back and forth between Transmitter and Receiver modes as needed for greater flexibility on the job. All PocketWizard Transceivers default to Receiver mode. When a hot shoe or other trigger is detected, it automatically switches to Transmitter mode
Auto-Relay Mode
Easily trigger a remote camera in sync with distant remote flashes with Auto-Relay Mode. Put a camera where you can't be and have remote TTL or non-TTL lighting at the same time. Expand your coverage and increase your creativity
Channels / Learn Mode
The FlexTT6 has two channel configuration settings; C1 and C2. Each can be programmed as needed with up to 20 ControlTL channels for TTL photography or Manual Power Control or 32 standard channels for manual flash photography. Channels can be configured with the PocketWizard utility or use the Learn function to quickly program channels or the reset function to configure back to factory settings
ZoneControl
Add the AC3 ZoneController on top of your FlexTT6 and gain three zones of power control right from the camera's position. Works in both auto/CLS/i-TTL and manual. Shut down an entire zone with the flick of a switch.
SpeedCycler with an AC3 ZoneController
Previously only seen with PocketWizard's MultiMAX radios, this new mode is designed to rapidly cycle through multiple flash units fired individually in sequence. This allows photographers to fire a camera in sync with flashes faster than a single flash unit can recycle. It can also be used for triggering remote cameras sequentially. SpeedCycler is engaged on a transmitting FlexTT6 via the PocketWizard Utility. SpeedCycler mode requires an AC3 ZoneController in the top hot-shoe of the on-camera PocketWizard radio. Zones A, B and C will be triggered sequentially and individual zones can be disabled by setting the AC3's Zone Switch to the off position. Both TTL and manual flash controls are supported.
Flash Power Control without a Camera
Photographers can now take their AC3 and transmitting radio off-camera and use it to set power levels for any flash with a ControlTL receiver, making it more convenient to use an optically triggered light meter or control the power levels with just a FlexTT6 and AC3 in their hand while another photographer takes the pictures. When connected to a FlexTT6, manual power levels are transmitted to remote flashes when the TEST button is pressed even when the transmitter is off the camera. This affects both speedlights connected to receiving FlexTT6s and larger flashes like AlienBees and Elinchrom RX units with ControlTL receivers
Camera/Flash Ports
The FlexTT6 Transceiver has two plug-in ports for use with remote E-TTL II cameras and other flash units, including studio strobes. With its auto-relay function, the Flex can trigger a remote camera and transmit to a remote strobe.
Continuous Fast FPS
Never before have you been able to shoot remote E-TTL non-stop in continuous high-speed mode. Fill the buffer! Nothing else comes close
Low-Profile Design
The FlexTT6 lies flat, stays out of the way and features a flip-up antenna for additional range when needed
High Speed Sync (HSS or FP Sync) Disable Mode
Select either HSS Sync or HyperSync at shutter speeds at or over 1/640. This allows you to use HyperSync and the benefit of full power flash all the way up to 1/8000 with certain flash systems.
Auto Trigger Select for ControlTL
The hot shoe on the Flex TT6 will trigger just about any hot shoe flash placed into it in addition to the Canon Speedlite's it is designed for. Yes, you can now fire just about any hot shoe flash including Vivatar, Nikon, etc., in manual mode only and not TTL mode (max trigger voltage < 50V, use P2 port for up to 200V).
Specifications
TTL compatibility
Canon E-TTL II compatible - Visit PocketWizard.com for an updated compatibility list.
Frequency
US FCC / IC: 340.00 - 354.00 MHz (US only - not for Europe)
Channels
CE: 35 channels over 5 frequencies
US FCC / IC: 52 channels over 26 frequencies
Antenna
6.9 cm (2.7") rubberized with 180 degree swing
Transmit output power
Less than 0.001 watt (1/1000 of a watt or 1 milliwatt)
Range performance
30 to 800' (9.14 to 243.84m) epending on flash used, antenna orientation, RF shielding and other variables
Mounting
Hot shoe, 1/4-20, lanyard
Maximum shooting rate
TTL Mode: within 1 FPS of camera's maximum FPS
Basic Trigger Mode: Camera Max FPS
Power & Configuration/ Channel switch
OFF - C.2 - C.1
Zone select switch
A-B-C (matches Canon slave groups or MultiMAX zones)
Status indicator
LED: Green, Amber, Red status indications
Camera / P1 port
3.5 mm (1/8") stereo miniphone for 2-stage remote camera triggering
Port Voltage Handling: up to 50 volts, 100 milliamp continuous non-polarized
Tip = Trigger / Ring = Pre-Trigger / Sleeve = Ground
Flash / P2 port
3.5 mm (1/8") mono miniphone
Port Voltage Handling: up to 200 volts, 4 amps peak, 250 milliamp continuous, non-polarized
Minimum receive contact time
Camera / P1 Port = 80 milliseconds
Flash / P2 Port = 500 microseconds
Voltage present
3.3 VDC (all pins) - safe for all cameras
Hot shoe voltage handling
Up to 50 volts
USB
USB Compliant 2.0, Mini-B Connector, 5VDC regulated, 100mA, Pin 1 Positive, Pin 4 Ground
Operating temperature
Above -15 to 50 deg. C (5 to 122 deg. F)
Storage temperature
Above -30 to 85 deg. C (-22 to 185 deg. F) (without battery)
Housing
High impact plastic, captive battery door, hot shoe made of glass reinforced resin
Power
Two (2) AA (IEC:LR6) alkaline recommended, other chemistries (NiMH, NiCAD, Lithium) allowed, USB
Battery life
60+ hours
Dimensions (LxWxH)
9.2 x 2.9 x 1.4" (23.37 x 7.37 x 3.56cm) antenna lowered
Weight
5.4 oz (153.09g)
3.8 oz (107.73g) without batteries
WHO WE ARE
Adorama is one of the nation's largest Photographic retail and mail order suppliers. For over 35 years we have been serving professionals as well as amateurs in the photographic, video, digital imaging and telescope fields. We offer the best combination of quality services, vast selection, knowledgeable staff, and competitive pricing.
Adorama Camera is your #1 source for the best and newest products in the photographic industry, and the largest inventory of items such as Digital Cameras, Digital Camera Accessories, Memory Cards, 35mm Cameras, Medium Format Cameras, Lenses, Video Cameras, TV's, MP3 Players, Binoculars, Telescopes, Scanners, Inkjet, Dye-Sub & Laser Printers, Office Fax machines, Shredders, Projectors, Inkjet Paper, Photographic Accessories, Filters, Batteries, Cases, Tripods, Flashes, Lighting & Studio Equipment, Film, Darkroom Products and Audio Video Equipment.
All new equipment comes with all of the factory included accessories, including a full manufacturer's warranty, unless otherwise noted.
We only post items that are in-stock and ready to ship.
PAYMENT
Paypal with Immediate Pay is our only method of payment. Your Paypal account must be a Verified Paypal account.
In an effort to comply with our Authorized Dealer contracts with the manufacturers and to best control our inventory levels we reserve the right to limit quantities or cancel orders to Resellers and Exporters.
Please note: Inventory is not reserved until the item is paid for.
Please include a phone number as the carriers and our Trucking Companies require it.
INTERNATIONAL
International taxes and duties: International shipments may be subject to import fees, duties and taxes, which are levied once a shipment reaches the respective country, in addition to the brokerage fees/custom clearance charges which may be imposed by the carrier. These charges must be borne by the recipient. Adorama has no control over these charges and cannot predict what they might be. Orders shipped using eBays (GSP) "Global Shipping Platform" have already paid their taxes and must contact eBay directly for any issues.
SHIPPING
Adorama's eBay store ships to the 48 Contiguous United States. We do not ship to APO & FPO, Alaska, Hawaii and Puerto Rico.
We now ship many items to Canada, parts of Europe and Australia. If the item does not have the option, please don't ask.
We do not ship to other International locations.
Items with "free shipping" are only shipped free to the 48 contiguous United States.
Combined shipping is available by using the Add-to-Cart button and confirming that the shipping carriers for each item are the same BEFORE making the Payment. eBay's new checkout will then consolidate your items and present to you the better shipping rates.
All orders must be shipped with a printed invoice included. We can not ship orders without the invoice or a lower value invoice. Gift Invoices may be requested if you contact us immediately after payment during business hours. No guarantees for other times.
Shipment errors due to a bad address entered by the buyer and will not be credited for shipping charges if returned or at all if lost or abandoned by the carrier.
We supply tracking information directly to your eBay account within 24 hours after the shipment leaves our warehouse. Please make sure to check your eBay email address and that it does not go into spam or junk. Approved Change Requests may not be updated on eBays portal, please check the emails.
Returns
For the first 30 days from date of receipt of your purchase you may return the merchandise for a full money back refund, excluding any shipping charges (for items which we offer free shipping, our standard shipping charges will be deducted from any refund or credit).
Returned or exchanged products must be in brand-new, mint condition. Items must be in the original, undamaged manufacturer's packaging with all packaging materials, including instruction booklets, packing inserts, and the blank warranty cards. Memory cards and any other Blister Pack items are not returnable once opened. Any merchandise missing the original Universal Product Code (UPC) cannot be returned. The manufacturer's labeled packaging must be enclosed within an additional shipping carton. Please do not place stickers or shipping labels on the original manufacturer's package.
Printers are not returnable once the Toner Cartridges have been installed or released.
Desktop Computers, Laptops, Tablets & Notebooks are not returnable once they have passwords or other software installed, have been registered with or returned to the manufacturer for any reason.
Please use the Return this Item or Contact Seller button on your Purchase History page to ask us any questions or request a return. Adorama cannot accept COD or freight-collect shipments.
Please enclose a copy of your invoice with your return and tell us whether you would like the item to be replaced or refunded.
Returns can take up to 8 days in-house from the date we receive it to process.
When returning an item, please make sure you use a shipper which provides you with Insurance and a tracking number. Items returned without a tracking number might take much longer to be processed.
If you live in New York you may bring the return to our Manhattan store for exchange or refund.
Hours of operation
Mon-Thurs:
9:00am - 6:00pm
Friday:
9:00am - 1:00pm
: 12pt;"> 9:00am - 6:00pm
Friday:
9:00am - 1:00pm