TOA M-51S Microphone Input with Voice Gate Screw Terminal Module

Description

TOA M-51S Microphone Input with Voice Gate Screw Terminal Module
Specs:
For Balanced, Low Impedance Microphones.
Low Cut Filter
for tone control, 330 Hz, 6 dB/octave.
Phantom Power
, +22 VDC for condenser-type microphones. Active by default, cut Jumper J1 to disable.
Voice Gate Function
, module OFF until input signal exceeds threshold.
Sensitivity Control
- turn clockwise to increase sensitivity (to open gate with lower input signal) and counter- clockwise to reduce sensitivity (to open gate with higher input signal).
By purchasing this item you do hereby acknowledge that you are familiar with the proper operation and safety precautions and will fully follow the manufacturer's recommended instructions for the safe and proper use of this item.
To my customers, please note your satisfaction is very important to me, if there is any reason you can not give us the best possible rating and positive feedback, please contact me through eBay so the issue can be resolved.
We only ship to paypal verified addresses, please do not ask us to ship to a different address