-40%

Vantec USB 3.0 To Dual Gigabit Ethernet Network Adapter

$ 27.97

Availability: 75 in stock
  • Restocking Fee: No
  • Type: Adapter
  • Condition: New
  • Country/Region of Manufacture: China
  • Brand: Vantec
  • Item must be returned within: 30 Days
  • Modified Item: No
  • Custom Bundle: No
  • California Prop 65 Warning: This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
  • Return shipping will be paid by: Buyer
  • All returns accepted: Returns Accepted
  • Non-Domestic Product: No
  • MPN: CB-U320GNA
  • Refund will be given as: Money Back

    Description

    Vantec USB 3.0 To Dual Gigabit Ethernet Network Adapter
    Bring Dual Gigabit Access to Your System!
    Vantec introduces the USB 3.0 To Dual Gigabit Ethernet Network Adapter bringing you Dual Gigabit Ethernet through a single USB port. With the ease through a single USB connection, you can gain gigabit network speeds of up to 1000Mbps and be connected to two separate physical networks for any special function like network management, networked virtual machine configuration, bridging, gateway management, networking troubleshooting and more. This is a convenient solution for any IT administrators to bring along with their systems such as laptops, Ultrabooks or Macbook Airs to analyze and manage any networks. This USB 3.0 To Dual Gigabit Ethernet Network Adapter comes with a wealth of features to help enhance its use.
    Dual Gigabit Ethernet ports through a single USB connection
    Compliant with Universal Serial Bus 3.0 Specification, Revision 1.0
    Compatible with USB Specification, Revision 2.0
    Supports CDC-ECM
    Supports crossover detection, auto-correction, polarity correction, adaptive equalization, cross-talk+echo cancellation, and timing recovery
    Supports advanced link down power saving when Ethernet cable is unplugged
    Supports ACPI, APM, OSPM, and Wake-on-LAN
    Supports jumbo frame up to 9K bytes
    USB Cable Type A & 2 x RJ45 connection
    LED indicators for Ethernet connection
    Support Windows XP, 7, 8, 8.1 / Mac OS X 10.8 or Greater / Latest Linux kernel
    Software Offload:
    Microsoft NDIS5, NDIS6 Checksum Offload (IPv4, IPv6, TCP, UDP) and Segmentation Task-offload (Large send v1 and Large send v2) support
    IEEE:
    Supports full duplex operation with IEEE 802.3x flow control and half duplex operation with back-pressure flow control
    Fully compliant with IEEE 802.3, IEEE 802.3u, IEEE 802.3ab
    Supports IEEE 802.1P Layer 2 Priority Encoding
    Supports IEEE 802.1Q VLAN tagging
    Supports IEEE 802.3az-2010 (Energy Efficient Ethernet)
    Microsoft AOAC (Always On Always Connected):
    Supports 16-set 128-byte Wake-Up Frame pattern exact matching
    Supports link change wake up
    Supports Microsoft WPD (Wake Packet Detection)
    Supports Protocol Offload (ARP & NS)
    Intel CPPM (Converged Platform Power Management):
    Supports L1 with 3ms BESL (USB 2.0)
    Dynamic LTM messaging (USB 3.0)
    Supports U1/U2 (USB 3.0)
    Supports selective suspend
    Specifications:
    Model:
    CB-U320GNA
    Device Support:
    USB 3.0 Type A (backward compatible with USB 2.0)
    USB Port:
    1, Type A
    Gigabit Network Port:
    2 - RJ45 Ethernet (10/100/1000)
    Power:
    USB Bus powered
    Dimension:
    86 x 35 x 17 mm
    Cable Length:
    194 mm
    *Actual speed may varies depending on the OS, condition, configuration, network traffic and equipment used.
    System Requirements:
    Microsoft Windows XP, Vista, 7, 8, 8.1, 10 / Mac OS X 10.8 upto 10.15 / Latest Linux OS
    USB 3.0 Port preferred to get maximum speed
    What's included:
    USB 3.0 To Dual Gigabit Ethernet Network Adapter
    Installation Guide
    Driver CD