WiFi 5V-24V WS2811 / 2812 Controller, up to 1190 pixels / Wireless E1.31 (sACN)

Description

WiFi   WS2811 / WS2812 (DC5V-24V)   Controller
Manual Instruction
www.xzlgroup.com/WiFi-WS2812-Controller.pdf
Unicast Format
Input: Wireless E1.31 (sACN) data & DC5V-24V Power
Output: WS2811 / WS2812 Pixel lighting signals & DC5V-24V Power
Controllable Pixel Types:
WS2811 / WS2812  /  WS2812B
DC5V-24V Pixels are all controllable
Output 7 ports (7 universes) up to 170*7=1190 pixels (Total 3570 channels)
Unit Size: L11.5cm x W9cm x H4 cm ; Package Size: 16x16x6cm ; G.W.: 300g
Accessories:
(1) Regulated DC 5V 1A Power Supply -- 1 pc
(2) One meter length USB cable -- 1 pc
Product Brief
(1)
Unicast Format E1.31 (sACN) to WS2811 / WS2812 WiFi controller, output up to 1190 pixels (3570 channels, 170 pixels for each output port).
(2)
Controllable Pixel Types:
WS2811 / WS2812  /  WS2812B   (DC5V-24V Pixels are all controllable)
(3)
Max DC Current Input/Output: 30 Amp.  DC Voltage Range Input/Output: 5V-24V
(4)
Easy WiFi ID & Password setting.
(5)
Accessories in packakge: DC5V 1A adapter - 1pc ; One meter USB cable - 1pc.
(6)
Multiple controllers with different IP assigned can be used to achieve more channels output.
(7)
Compatible with any software package that supports the E1.31 (sACN) protocol output in Unicast format. For software output setup, just select the Unicast E1.31 / sACN / ACN output type, no need for driver installation.
Recommended softwares with E1.31 unicast output option.
(1) Vixen
http://www.vixenlights.com/
(2) Nutcracker (xlights)
http://nutcracker123.com/nutcracker/releases/
(3) LOR: Light-O-Rama
http://www.lightorama.com/
(4) Jinx
http://www.live-leds.de/
Note: This controller does not work with Madrix.  So far Madrix supports E1.31 output in Multicast format only, Madrix does not support E1.31 output in Unicast format.
××× You must set the controler's IP, WiFi ID and WiFi password to match your wireless router ×××
You can also change the universe number assigned to each output port.
Note: The valid range of universe number is from 1 to 255.
Below is the default setting for universe number assigned to each output port:
The default assigned universe No. is 1 for output Port 1.
The default assigned universe No. is 2 for output Port 2.
The default assigned universe No. is 3 for output Port 3.
The default assigned universe No. is 4 for output Port 4.
The default assigned universe No. is 5 for output Port 5.
The default assigned universe No. is 6 for output Port 6.
The default assigned universe No. is 7 for output Port 7.