Wireless DMX512 Controller Built-in Battery Receiver XLR Transmitter For Music

Description

China Express
Wireless DMX512 Controller Built-in Battery Receiver XLR Transmitter For Disco DJ Party Bar Light
BRAND NEW - UNOPENED - UNUSED - BOXED - SEALED
Product Description
Feature
Latest plan remote DMX512 beneficiary have an inherent battery, needn't bother with power connector any more when it works. 2 hours full charging time, 8 hours working time. Clients likewise can utilize the item while charging. Metal Dark Shell. ID Code "1-7" bunches ID code, press 'KEY' for setting, it just can work under same ID code of transmitter and recipient. (Same Drove Tone). This item receives a 2.4G ISM recurrence area. High viable GFSK tweak, correspondence plan. No time postpone when signal information is communicating, signal information is continuous and dependably. RF recurrence 2.400 - 2.525G 126 channels hopping recurrence consequently, high enemy of sticking capacity. The red Drove streaks when transmitter sends DMX information by no meddled recurrence area, at that point collector changes imparted recurrence segment. Green Drove streak till got adjusted same ID esteem, Driven blaze all the more quick once DMX information more fast.
Specification
2.4GHz remote DMX512 R/T 7 gatherings ID code settable, Client can utilize 7 gatherings singular remote net with no meddle. Information voltage: 5VDC 500mA MIN Correspondence distance: 400M (apparent distance) Battery: 16340 battery 3.7V 650mA Max sending power rate: 20dBm Collector Affectability: - 94dBm computer processor: 32-bit ARM Center Adjustment: GFSK DMX Signal Interface: RS485 Working temperature: - 40 ~ 85 °C,Storage Temperature: - 65 ~ 150 °C Encompassing Relative Dampness: 5 to 95% (non-gathering) Programmed Reboot Trigger: Worked in WDT (guard dog clock) Note: Transmitter without battery, should utilize the force adater. Beneficiary underlying Battery, full charging 2hrs, can work 8hrs
Operating Manual
1. Press transient switch over the side drove marker to demonstrate ID setting 2. Press again to set IC,to the shading ID wanted, adding 1 each time you press the switch will propel the shading ID code. 3. Working condition: Drove consistent lit up:No DMX or remote sign. Red Drove streak: Communicating Green Drove streak: Receiving
Establishing Communication
1. Force on DMX512 remote got board first and afterward following to control up the sent sheets. 2. Press "Key" catch to set same ID worth of sent board and got board. If it's not too much trouble, utilize distinctive ID esteem on the off chance that you need utilize more than 1 gathering remote universals at same time in same spot. 3. The red Drove streaks when transmitter sends DMX information by no meddled recurrence area, at that point collector changes imparted recurrence segment. Green Drove streak till got rectified same ID esteem, Driven blaze all the more quick once DMX information more fast.
Packaged including:
1T = 1pc transmitter +1pc power connector 1R= 1pc beneficiary with battery + 1pc force connector 1T 1R= 1pc transmitter + 1pc collector with battery +2pcs power connectors 1T 2R= 1pc transmitter + 2pcs recipient with battery +3pcs power connectors 1T 3R= 1pc transmitter + 3pcs beneficiary with battery +4pcs power connectors 1T 4R= 1pc transmitter + 4pcs collector with battery +5pcs power connectors 1T 5R= 1pc transmitter + 5pcs collector with battery +6pcs power connectors 1T 6R= 1pc transmitter + 6pcs collector with battery +7pcs power connectors 1T 7R= 1pc transmitter + 7pcs beneficiary with battery +8pcs power connectors 2T 3R= 2pc transmitter + 3pcs collector with battery +5pcs power connectors 2T 4R= 2pc transmitter + 4pcs collector with battery +6pcs power connectors 2T 5R= 2pc transmitter + 5pcs recipient with battery +7pcs power connectors 2T 6R= 2pc transmitter + 6pcs collector with battery +8pcs power adapters
FAQ
Q : Would i be able to utilize this with receivers ? Would i be able to use to make the mouthpieces remote ? A : No....this is for remote DMX control of lights not sound . Q : Does it have a 5 pin connector for interfacing with the DMX port on a lighting console? A : It is a 3-Pin. In the event that you need 5-Pin, you can contact Outsider client assistance . Q : What number of collectors can a transmitter work with? A : One transmitter can beused limitless beneficiary Q : Have collector inherent battery? A :yes , Worked in Battery . 16340 battery 3.7V 650mA
width: 0 x height: 0 x length: 0 x weight: 0
RoHS
CN(Origin)
Stage Lighting Effect
DMX Stage Light
0.6W
5V
Professional Stage and DJ
500M (Noticeable Distance)
16340 battery 3.7V 650mA
-94 dBm
RS485
-40 ~ 85 Celsius
-65 ~ 150 Celsius
5 to 95% (Non-Condensing)
Built-in WDT (guard dog timer)
GFSK
Silver
XLR 3 pin plug
Payment Policy
We accept PayPal secure payment.
We offer 30 days refund.
Shipping Policy
We ship this item to worldwide destinations, some countries are excluded
Orders are processed within 3-4 Business days, after payment verification.
We only ship to the ADDRESS on PAYPAL. Please make sure your PayPal and eBay address is correct. If not, please correct it before payment.
Shipping to the U.S. is by ePacket Service which takes around 21 days to arrive. Tracking Number will be provided.
If you have not received your shipment within 45 days from payment, please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!
Please pay attention that import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Check with your country's customs office to determine what these additional costs will be prior to bidding/buying, Thank you.
Return Policy
We
allow
30 days to return & replace an item if it is defective. All returned items MUST BE in the original packaging and you MUST PROVIDE us with the shipping tracking number, specific reason for the return, and your eBay ID. Return shipping is to be paid by the Buyer.