Wireless DMX512 Controller Built-in Power Receiver XLR Transmitter For DMX

Description

Wireless DMX512 Controller Built-in Power Receiver XLR Transmitter For DMX
Wireless DMX512 Controller Built-in Power Receiver XLR Transmitter For DMX
FEATURES
The latest design wireless DMX512 Receiver has a built-in battery, doesn't need a power adapter anymore.
2 hours full charging time, 8 hours working time. Users can also use the product while charging.
Metal Black Shell.
ID Code "1-7" groups ID code, press 'KEY' for setting, it only can work under same ID code of transmitter and receiver. (Same LED Color).
This product adopts a 2.4G ISM frequency section. High effective GFSK modulate, communication design.
No time delay when signal data is transmitting, signal data is real-time and reliable.
RF frequency 2.400 - 2.525G 126 channels jumping frequency automatically, high anti-jamming ability.
The red LED flashes when the transmitter transmits DMX data by no interfered frequency section, then the receiver changes communicated frequency section.
Green LED flashes until it receives the correct ID value, LED flashes faster once DMX data is faster.
Specification
2.4 GHz Wireless DMX512 R/T 7 groups ID code settable, User can use 7 groups individual wireless net without any interfere.
Input Voltage:
5VDC 500mA
Min Communication distance:
400 M (visible distance)
Battery:
16340 battery 3.7V 650mA
Max Transmitting Power Rate:
20dBm
Receiver Sensitivity:
-94dBm
CPU:
32-bit
ARM Core Modulation:
GFSK
DMX Signal Interface:
RS485
Operating temperature:
-40 ~ 85 °C,
Storage Temperature:
-65 ~ 150 °C
Ambient Relative Humidity:
5 to 95% (non-condensing)
Automatic Reboot Trigger:
Built-in WDT (watchdog timer)
Note: Transmitter without battery, must use the power adapter. Receiver built-in Battery, full charge in 2hrs, can work for 8hrs
Operating Instructions
1. Press momentary switch above the side led indicator to indicate ID setting
2. Press again to set IC, to the color ID desired, adding 1 each time you press the switch will advance the color ID code.
3. Working conditions: LED constantly lit up:
No DMX or wireless signal.
Red LED flash: Transmitting
Green LED flash: Receiving
Establishing Communication
1. Power on DMX512 wireless received board first and then following to power up the transmitted boards.
2. Press the "Key" button to set the same ID value of the transmitted board and received board. Please use a different ID value if you need to use more than 1 group of wireless universals at the same time in the same place.
3.
The red LED flashes when the transmitter transmits DMX data by no interfered frequency section, then the receiver changes communicated frequency section.
Green LED flashes until it receives the correct ID value, LED flashes faster once DMX data is faster.
Package Includes:
1T 1R= 1x transmitter + 1 x receiver with battery + 2 x power adapters
FAQ
Q: Can I use this with microphones? Can I use it to make the microphones wireless?
A: No....this is for wireless DMX control of lights not audio.
Q: Does it have a 5 pin adapter for connecting to the DMX port on a lighting console?
A: It is a 3-Pin. If you need 5-Pin, you can contact ALIEN customer service.
Q: How many receivers can a transmitter work with?
A: One transmitter can be used with unlimited receivers
Q: Does the receiver have a built-in battery? A: yes, Built-in Battery. 16340 battery 3.7V 650mA
PAYMENT
We accept payments through PayPal, Immediate Pay
SHIPPING
[SHIPPING]]
DELIVERY & RETURN POLICY
Return shipping is the buyer's responsibility unless the return is a result of our mistake. We will pay for shipping replacement back to you if an exchange is requested.